CO-40.5 DSP-BT
Description
- Analog 5-Channel Amp with 7-channel DSP and BT
- APP Software adjustable via ANDROID BT or iOS BT
- SIGMA DSP Processor by ANALOG DEVICES
- automatic UPDATE via WLAN
- 7x parametric EQ’s per channel
- 8x presets
- HP/LP filter with 12 dB
- 2x DSP controlled RCA outputs (2 volts)
- 2x AUX input(one with signal detection)
- 4x RCA inputs
- 4x Molex high-level Inputs (5 to 20 volts) with automatic switch-on
- 1x remote output
- frequency range: 30-20000 Hz
- up to 6 volts/5sec
- operating voltage 9.6-18 volts
Performance Data
- 5x 40(60) WRMS at 4(2) ohms
Dimensions
- 123x45x80 mm
R-110.4 DSP-BT
Description
- 4-Channel Amp with 8-channel DSP and BT
- 4-channel analog high-performance amplifier controlled via APP
with 8-channel SIGMA DSP processor from ANALOG DEVICES
SOFTWARE/APP adjustable via ANDROID-BT or iOS-BT - automatic UPDATE via WLAN
- 30x parametric EQ’s per channel
- 8x presets
- up to 48 dB
- 4x DSP controlled RCA outputs (5 volts)
- 1x AUX input
- 4x RCA Inputs (low level 0.5 to4 volts)
- 4x Molex high level inputs (5 to 20 volts) via BTL or SE
signal detection with switch-on automatic - 1x remote output
- frequency range: 10-24000 Hz
- Signal-to-noise ratio
ADC:107 dB and DAC: 112 dB - Start/stop capable up to 6 volts/5sec
- operating voltage 9.6-18 volts
- Operating temperature from -40C° to +85C°
Performance Data
- 4x 110(200) WRMS at 4(2) ohms
- 2x 400 WRMS mono 4 ohms
Dimensions
- 325x50x185 mm
X-80.4 DSP-BT
Description
- 4-Channel Amp with 8-channel DSP and BT
- 4-channel digital high-performance amplifier controlled via APP
with 8-channel SIGMA DSP processor from ANALOG DEVICES
SOFTWARE/APP adjustable via ANDROID-BT or iOS-BT - automatic UPDATE via WLAN
- 30x parametric EQ’s per channel
- 8x presets
- up to 48 dB
- 4x DSP controlled RCA outputs (5 volts)
- 1x AUX input
- 4x RCA Inputs (low level 0.5 to 4 volts)
- 4x Molex high level inputs (5 to 20 volts) via BTL or SE
signal detection with switch-on automatic - 1x remote output
- frequency range: 10-24000 Hz
- Signal-to-noise ratio
ADC: 107 dB and DAC: 112 dB - Start/stop capable up to 6 volts/ 5sec
- operating voltage 9.6-18 volts
- Operating temperature from -40C° to +85C°
Performance Data
- 4x 80(200) WRMS at 4(2) ohms
- 2x 300 WRMS mono 4 ohms
Dimensions
- 180x45x158 mm
R-110.4 DSP
Description
- 4-Channel Amplifier with 8-channel HIGH-POWER DSP
- 4-channel digital high power-amplifier with 8-channel DSP
- Freescale Multi-Core Chip
- full active mode possible,
- PUMPERlimiter
- up to 86% efficiency possible
- 4x RCA inputs (Low level 0,5 to 4 Volt)
- 4x Molex high-level inputs (5 to 20 Volt) with automatic remote
- 4x RCA outputs (5 Volt)
- 1x AUX-input
- 1x remote output
- SD-card slot
- Intuitive GUI
- Dual-core-chip with 250 MHz processing power
- Sampling rate 96 kHz (192 kHzoptional)
- frequency range: 10-44000 Hz
- signal to noise ratio digital: 108 dB
- analog: 102 dB
- Crosstalk attenuation higher than 92 dB
- start/stopp ability 6 Volt/5 sec
- operating voltage 9,6-18 Volt
- operating temperature -20C° to +80C°
Performance Data
- 4x 110 WRMS an 4 Ohm
- 4x 200 WRMS an 2 Ohm
- 2x 400 WRMS mono an 4 Ohm
Dimensions
- 325 x 50 x 185 mm
X-100.5 MDSP-BT
Description
- 5-Channel Amp with 9-channel DSP and BT
- APP Software adjustable via ANDROID BT or iOS BT
- 9-channel SIGMA DSP processor from ANALOG DEVICES with automatic
UPDATE via WLAN - 30x parametric EQ’s per channel
- 8x presets up to 48 dB slope
- 4x DSP controlled RCA outputs (5 volts)
- 6x RCA Inputs (low level 0.5 to 4 volts)
- 6x Molex high level inputs (to 12 V) via BTL or SE signal detection with
switch-on automatic - 1x remote output
- frequency range: 10-24000 Hz
- Signal-to-noise ratio ADC: 107 dB and DAC: 112 dB
- Start/stop capable up to 6 volts /5sec
- operating voltage 10-16 volts
- operating temperature from -40C° to +85C°
Performance Data
- 4x 100 WRMS an 4 Ohm
- 4x 140 WRMS an 2 Ohm
- 1x 30 WRMS an 4 Ohm
Dimensions
- 113 x 38 x 163 mm
X-100.5 MDSP-BT 24V
Description
SPECIAL FOR TRUCK
- 5-Channel Amp with 9-channel DSP and BT
- APP Software adjustable via ANDROID BT or iOS BT
- 9-channel SIGMA DSP processor from ANALOG DEVICES with automatic
UPDATE via WLAN - 30x parametric EQ’s per channel
- 8x presets up to 48 dB slope
- 4x DSP controlled RCA outputs (5 volts)
- 6x RCA Inputs (low level 0.5 to 4 volts)
- 6x Molex high level inputs (to 12 V) via BTL or SE signal detection with
switch-on automatic - 1x remote output
- frequency range: 10-24000 Hz
- Signal-to-noise ratio ADC: 107 dB and DAC: 112 dB
- Start/stop capable up to 6 volts /5sec
- operating voltage 20-32 volts
- operating temperature from -40C° to +85C°
Performance Data
- 4x 100 WRMS an 4 Ohm
- 4x 140 WRMS an 2 Ohm
- 1x 30 WRMS an 4 Ohm
Dimensions
- 113 x 38 x 163 mm
X-100.9 MDSP-BT
Description
- 9-Channel Amp with 13-channel DSP and BT
- APP Software adjustable via ANDROID BT or iOS BT
- 13-channel SIGMA DSP processor from ANALOG DEVICES with automatic
UPDATE via WLAN - 30x parametric EQ’s per channel
- 8x presets up to 48 dB slope
- 4x DSP controlled RCA outputs (5 volts)
- 6x RCA Inputs (low level 0.5 to 4 volts)
- 6x Molex high level inputs (to 12 V) via BTL or SE signal detection with
switch-on automatic - 1x remote output
- frequency range: 10-24000 Hz
- Signal-to-noise ratio ADC: 107 dB and DAC: 112 dB
- Start/stop capable up to 6 volts /5sec
- operating voltage 10-16 volts
- operating temperature from -40C° to +85C°
Performance Data
- 4x 100 WRMS an 4 Ohm
- 4x 140 WRMS an 2 Ohm
- 1x 30 WRMS an 4 Ohm
Dimensions
- 113 x 38 x 163 mm
X-100.9 MDSP-BT 24V
Description
SPECIAL FOR TRUCK
- 9-Channel Amp with 13-channel DSP and BT
- APP Software adjustable via ANDROID BT or iOS BT
- 13-channel SIGMA DSP processor from ANALOG DEVICES with automatic
UPDATE via WLAN - 30x parametric EQ’s per channel
- 8x presets up to 48 dB slope
- 4x DSP controlled RCA outputs (5 volts)
- 6x RCA Inputs (low level 0.5 to 4 volts)
- 6x Molex high level inputs (to 12 V) via BTL or SE signal detection with
switch-on automatic - 1x remote output
- frequency range: 10-24000 Hz
- Signal-to-noise ratio ADC: 107 dB and DAC: 112 dB
- Start/stop capable up to 6 volts /5sec
- operating voltage 20-32 volts
- operating temperature from -40C° to +85C°
Performance Data
- 4x 100 WRMS an 4 Ohm
- 4x 140 WRMS an 2 Ohm
- 1x 30 WRMS an 4 Ohm
Dimensions
- 113 x 38 x 163 mm
DSP 4.6
Description
- DSP-SERIES 6-Channel
- 6-chanel DSP with Freescale Multi-Core Chip
- 4x RCA inputs (Low level 2 to 4 Volt) and 4x Molex high-level inputs (5 to 20 Volt) automatic remote
- 6 RCA outputs (5 Volt)
- 1x AUX-input
- 1x optical input and 1x optical output
- 1x remote output, SD-card slot
- Intuitive GUI
- Dual-core-chip with 250 MHz processing power
- Sampling rate 96 kHz (192 kHz optional)
- Frequenzy range: 10-44000 Hz
- Signal to noise ratio: digital:108 dB
- analog: 102 dB
- Crosstalk attenuation higher 92 dB
- start/stopp ability 6 Volt/5sec
- operating voltage 9,6-18 Volt
- operating temperature -20C° to +80C°
Dimensions
- 180 x 160 x 45 mm
DSP 8.12 Avalanche
Description
- DSP-SERIES 12-Channel Avalanche
- 12-channel DSP with Freescale Multi-Core Chip
- 8x RCA inputs (Low level 2 to 4 Volt) and 8x Molex high-level inputs (5 to20 Volt) with automatic remote
- 12x RCA outputs (5 Volt)
- 1x AUX-input
- 1x optical input and 1x optical output
- 1x remote-output
- SD-card slot
- Intuitive GUI
- 2 dual-core-chips with 250 MHz processing power
- Sampling rate192 kHz
- Frequenzy range: 10-44000 Hz
- Signal to noise ratio: digital:108 dB
- analog: 102 dB
- crosstalk attenuation higher 92 dB
- start/stopp ability 6 Volt/5sec
- operating voltage 9,6-18 Volt
- operating temperature -20C° to + 80C°
Dimensions
- 180 x 160 x 45 mm
DSP SERIES ZUBEHÖR
DSP BOX
DSP-SERIES Basic Module as Black Box
Interface between DSP IR, DSP SW, DSP CONTROLL and DSP DISPLAY
DSP CONTROL
DSP-SERIES Multi Rotary Controler/Switcher
Variable control for volume and subwoofer-level.
In conjunction with the DSP DISPLAY, presets, balance, fader, bass, treble, output, input source selection and input VU meter can be controlled
for all channels as well as thebrightness of the display.
DSP DISPLAY
DSP-SERIES Control Panel
Display in metal case for presets, muting, clipping, SD carddisplay, sampling rate, DSP link, balance, fader, bass, treble,
output and input VU meter for all channels, volume and subwoofer level
size: 41.3 mm x 36.5 mm x 9 mm
DSP FRAME
DSP-SERIES Control Panel
Mounting frame for clipping the DSP DISPLAY
Frame still needs to be edited!
size: 71 mm x 60 mm x 14 mm
mounting depth: 11 mm
DSP RC
DSP-SERIES Wireless Remote Controller
Wireless remote controller for X-80.4 DSP, R-110.4 DSP DSP 4.6, DSP 8.12 over DSP IR or DSP IR RJ
DSP RC can control the volume, balance, fader andsubwoofer level
The presets, muting and the input source can also be selected
Battery included
Size: 165mm x 36.5mm x 9mm
DSP IR
DSP-SERIES Infrared Receiver
Infrared receiver for using the DSP RC
only possible in connection with the DSP BOX
DSP PC-BT
DSP-SERIES PCB with BLUETOOTH Connection
Replacement board with BLUETOOTH for X-80.4 DSP and R-110.4 DSP